|
Thats interests me why the yoke caused that unless it was a total impedance mismatch or if there is a cap in the yoke thats bad. The impedance is a definite possibility as the set that crt came out of had a totally different style chassis.
Tubejunky, I would avoid the shotgun recap at first, you may cause more problems that you have. First thing is find were the smoke is coming from and go from there. It could be anything from the flyback arcing to the no drive because the pins in the drive tube are not making good contact in the socket. Some pictures would help too, good ones of the chassis and where the smoke is coming from.
|