[tvcollector]

I've used WD40 on other VCRS before, i was working on a Panasonic Magnavox Hi-Fi, WD40 got all over the heads, and i was able to fix it. It seems to help with dried up grease, and seized parts along with contact cleaner.. I've aligned the guides many times and i only seem to get them aligned enough to get the tracking position correct, and a picture that bounces and jitters less, i can get the picture aligned to where i first noticed the problem other than the noticeable top three lines, and no Hi-Fi stereo. When i align the right guide in between the drum and audio heads, i notice the sound changes, but sounds better when the picture is not the best. I don't know, am i missing something that i should be aligning too?

Beta VCRS, on the servo board you can adjust the speeds, drum and some other things, and i had to adjust them also when aligning. On Panasonic VHS Servo boards, there are no adjustments for tape speeds, drum, video etc.