I got the Mica Caps from Mouser and installed them, I also went ahead and rewired the width coil circuit to match the schematic.
The set now comes on with the Horizontal locked and stable, no smearing, there's a very slight amount of ringing on the left side, a new damper helped and it's so slight it's not noticeable unless you really look for it on blank scenes.
I forgot to fix that vertical integrator thingy but the set works just fine without it so that can wait until the next time.
I cleaned the safety glass and the genuine simulated woodgrain screen surround and put the chassis back in.
I made and posted a quick video here:
http://vintagetvsets.com/videos/Video%2020%202.flv
I played that video through twice without a hiccup.
I just need to polish the brass covers that go on the small knobs for the Volume control and Channel Selector and glue them back on.