|
You might be on to something, Bob. I broke my own rule, because I left those filament caps in place! I figured they were in a low enough voltage circuit not to matter, but it makes sense to have leakage at that point. I'll try to find enough caps to replace them and see if that solves the problem. JR, I don't think I have a tube issue. I tested all of them when I first got this, and the only one that was bad was a 12SN7 in the vertical section which Bob was nice enough to give me a replacement for.
Tom: I have plenty of .1's, so I'll give that a try.
__________________
Evolution...
|