Thread: CTC-16 combo
View Single Post
  #32  
Old 02-25-2011, 10:08 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
I added a micro sized fuse holder right by the horz out tube socket for the cathode of the HOT. I have a 300ma fuse in there. I also bypassed the fuse with a .1uf cap. With the cap in place it should be very easy to check the HOT current, just pop the fuse out and hook up the milliamp meter. I dont know if the cap will have any effect on the fuse, I know there is some voltage drop across it in operation, not enough to effect the HOT bias, but maybe the pulse could cause a false blowing of the fuse? fuse fatigue?

anyway I think I will now check to see where the takeoff for the B+ is on the pcb (its on the audio board) and see about putting in a line fuse there as well.
Reply With Quote