|
Same diagram I got...how the hell do you read that???
Checked the coils, all seem ok. grid resistor read 5.3 to 7.6 m-ohms, so I put a resistor in there. Detector socket, from B- to one small pin I get 1.5 volts, to the other small pin 132 volts. I don't know which is plate or grid.
Picture is attached of the wire wound. Do I have to hook up the C power? With the current tubes in it the owners manual says not.
Last edited by stusnyder; 03-14-2015 at 10:01 PM.
|