[miniman82]

As advertised, the set works when I plug it in. Bad news is there's a strange red flicker in the picture, vertical height is not what it should be, and something smells bad after being on a minute or so...

Yanked the chassis and started looking for what I assumed would be a cap with one lead in the grave, but everything looks brand new in this chassis. Cap search was inconclusive, so I used my nose to see if I could track down the source of the foul odor. It seemed to be coming from the PCB with all the demod and driver stuff on it, but at first I didn't see anything. That got my analytical aviation eyes in high gear and I stared and stared- then I saw it: carbon tracking from pin 6 to 7 of the X demod/R-Y tube! It's a 6BL8, pin 6 is the plate and 7 is the cathode/supressor of the demod section. Looks like I'll have to dig the burnt crud out, and see if I can push some epoxy in the space left over to try and clean it up. If you guys have a better idea on how to fix that, I'm all ears.

Hopefully after fixing the demod trace, this thing should produce a color picture!