|
I would double-check the values of all the parts in the convergence circuits, especially if any of the controls are not responding the way the RCA service procedure describes them. I don't remember having problems with the one CTC-4 I have done, and on my CTC-5, the convergence was mediocre and not every control worked right. I found out two or three of the caps that had been replaced were the incorrect values, maybe .015 instead of .15 or similar. I fixed that problem and convergence came in pretty nicely.
__________________
Chris
Quote from another forum: "(Antique TV collecting) always seemed to me to be a fringe hobby that only weirdos did."
|