|
swapped out the CRT for the one I did the de-cat on. I used foam stick on weather strip all around the edge of the lens. Lined it up on the CRT and used some packing tape on the top and bottom to just hold it in place.
the actual replacement took about 45min start to finish, most of which was from note taking on measurements on the neck parts.
Powered it up and I got a nice bright pic, but it will of course need a purity and convergence setup. I decided had done enough, so will give to that later next week when I am in the mood for it.
the old CRT is now sitting in the nasty bong water in the kiddie pool starting the de-cat process on it.
|