|
"The easiest place to start is with the vertical deflection coils (the ones on the neck of the CRT) - check them for continuity with a multimeter."
Forgive my new guy ignorance but I don't know how to do that. I know how to check continuity with a meter but I'm not sure where you're suggesting I check. Could you elaborate on that some more for me?
"After you check the deflection coil, check R3, the vertical linearity control and R4 the vertical size control.
I assume you've already checked V13 the 6C4 and V14 the 6V6."
I've tested V13 and V14, they both check good. I've also adjusted R3 and R4 to no avail.
"I might have to pull my chassis and see what they really did."
Wow! You guys are so helpful here it's hard to believe. Please don't go that overboard for me yet. Let me do some due diligence of my own before we get to that point.
|