|
ok AFC diode was leaky on one side, so that should fix the horz and hopefully the color sync.
was checking over the PS caps, the doubler was def a replacement, the give away was the masking tape cover, and the fact that it was a 2 section cap tied together (I doubt the factory would do that).
I was extruding a nice rubber poop out of one of the unused slots on the bottom, looks like a heat and pressure issue, so I will be looking for a 160uf 250v AND a proper can cover. Its a bit crowded on the bottom so I will need to stuff a can.
There are a few suspect caps that will get changed out, and it still has a bumblebee .047 safety cap (I will clip the leads long and dump in on the audiophools on ebay, should get enough to buy all the caps I will need).
|