|
The next day, I checked the fit. The cone was too high. So I removed the rubber surrounding the cone, and flipped it. This gave me about a 1/4 inch drop. You want the cone to be close to flush to the top of the frame as possible. If the cone sticks out over the top, you will force the voicecoil to bottom out, and if it is too short, your voicecoil will not engage correctly.
Once I seen flipping the rubber surround will put the cone closer to where it was suppose to be, I glued it and left sit overnight.
Last edited by stusnyder; 03-14-2015 at 10:05 PM.
|