Thread: Wanamaker radio
View Single Post
  #4  
Old 05-30-2011, 12:42 PM
stusnyder's Avatar
stusnyder stusnyder is offline
VideoKarma Member
 
Join Date: Nov 2010
Location: northeast Pa
Posts: 486
I started with this little guy, the tubes are a 43, 25z5, two 77's, and a 78.
The power cord was cut at some point. What puzzles me is a few things. First it seems like the power cord wires connect to pins 5 and 6 on the 25z5.
The volume control is a combo with the power switch. one side of the switch goes directly to the chassis, and the other wire leads over to the 25z5, but is cut. If you look at the first pic, the leads sticking out from the chassis is what I think was the power cord. There is a screwdriver head pointing to the wire that goes to the power switch. The 2nd pic is a shot of the power switch, screwdriver pointing to the wire in question.
I can not find any info on this radio at all. No schematic, no nothing. Any ideas from anyone???
Attached Images
File Type: jpg Picture 004.jpg (55.1 KB, 24 views)
File Type: jpg Picture 005.jpg (56.8 KB, 28 views)
Reply With Quote