Quote:
Originally Posted by old_coot88
|
Filament has continuity.
After much thought I decided that this latest problem happened after I changed 10 tubes and 4 caps. I thought I would take a closer look at the items I replaced before the problem. Following the schematic to each cap I replaced led me to C62. C62 is connected to pin 3 on V17 and ground according to the schematic (as far as I can tell). Can some one confirm this? On the set it is connected to pin 3 and pin 7 on V17. I know I replaced lead for lead of the old cap and can still see a small amount of the lead of the old cap to confirm this. The old cap was one of the black beauties I mentioned that I missed before. I tested pin 7 and it is not connected to ground. Maybe I'm following some one else's botched repair? Or maybe I'm just misreading the schematic?
One other question. The schematic shows pin 7 and pin 8 of V17 connected to "Y" and "Z." There are some other connections on the schematic labeled as such. What does Y and Z refer to?