|
OK, maybe I found it! I was looking over C61 and C62 again to make sure they are installed correctly. C62 is indeed connected to +255v so all ok there. However, I am 99.9% sure C61 is MISSING! I will be especially sure this is the case if some one can speculate that a missing C61 would cause my glowing V18 problem.
This is also further reinforced by the fact that I had a cap with same value as C61 left over when I did the original recapping.
Last edited by vts1134; 06-25-2011 at 08:33 PM.
|