|
Green side up
That is a very good thought. Its good to think outside the box. In answer, the dust is still on top of the yoke and if I adjust the vertical hold I can observe a dim spot that I can make move up or down. I know on more contemporary tube sets if the horizontal coils were disconected there would be no HV at all. I am quite supprised that there is enough going through the core for Hi voltage sake, yet I have Zero horizontal sweep on the CRT. I would think even 1 shorted turn would kill the HV or greatly distort the sweep, but not eliminate sweep. I will be rechecking wiring again and comparing some photos I took before the rebuild. Again, any thoughts and ideas are welcome. Sometimes a new set of eyes, real or virtual, will find something I'm systematicaly overlooking. Thanks for your input guys.
|