Quote:
Originally Posted by vts1134
R81's value is on target.
I've got the video below. It starts with the slug all of the way "out." I found that I could adjust the slug a bit more after the end of the video and when I did the picture looked a lot like it did in the beginning of the video.
http://www.youtube.com/watch?v=74tfWbkOgH0 |
It looks to be spot-on at :02-:06, :09-:13, :19-:21, :26-:30, and :35-:37 in the vid. Set B1 back to where you had it there. There appears to be nothing wrong with the horiz. frequency. But the fine tuning is still off. The set wants to make a picture when the signal is tuned in properly. Are you turning the fine tuning stop-to-stop? On the chance the tuner's tracking might be off, click the channel selector to the next higher channel and try the F.T. stop-to-stop. Then try the same thing one channel lower. If the VCR is outputting on Ch.3, try it on Ch.4 (or vice versa).
The vert. hold is also gonna need adjusting when the pic is tuned in.
Yer
aaaalmost there.
oc