Okay, I'm about 80% done with changing the flyback on my CTC-12....and of course the new fly isn't exactly plug and play, so I had to transfer resistors and caps from the bad one.
I did all of the wiring successfully, except for two things. One is a thick blue wire running underneath the chassis to pin 9 on the picture tube. The second is a 47 meg resistor. Both are attached to the 4 pin junction on the flyback.
I redid everything else correctly, but like a ham fisted retard, somehow I lost the positions of where both of these should go.
Please help, it's all apart on my living room floor!
