|
Yes, to your question.
However, on the opposite side that was tighter I did insert single sticks (did not try to wedge 'em).
As the side that I wedged started to open up, those single layer sticks did tighten as the safety glass was starting to rest up against them by the tilting motion. My thoughts were being that the thing to do was to maintain that clearance and not have glass to glass contact as a pressure point, as well as no downward pressure on that side of the PVA by decreasing that clearance. Plus with those single layer sticks in there I could gauge that pressure by detecting how loose/tight they were. I sure did concern myself with breaking the safety glass but wanted to maintain upward pressure and know when to walk away to call it a day!
Even though it took me about 4 days to seperate the two, I always had the next day to look at it and see how I was progressing.
|