Thread: Fire!
View Single Post
  #35  
Old 10-11-2011, 07:50 PM
cbenham's Avatar
cbenham cbenham is offline
VideoKarma Member
 
Join Date: May 2006
Posts: 471
Quote:
Originally Posted by Chad Hauris View Post
I have noticed for old equipment that was designed for commercial/industrial use (jukeboxes, PA amps, broadcast equipment) and which was designed for 24 hr. a day use there is always fuse protection in the power line and usually additional protection such as a B+ fuse.
During the 6PM News I ran camera at an ABC TV affiliate in Florida. I saw an orange flicker down to my left which turned out to be the flyback in an RCA B&W Studio Picture Monitor burning brightly.

I dragged the beast by the power cord out of the studio and hit it with the fire extinguisher. The important point I made in my report was that the monitor had a 0.25 amp fuse in the B+ line to the flyback and a 2.5 primary line fuse. Both were the right value and NEITHER FUSE BLEW during the excitement.

So much for fuse safety.

Cliff
Reply With Quote
Audiokarma