Asside from cleaning up the wireing slightly it is still the same electronically.
I drew up a schematic. One mica is unlabled because I don't know how to read the color code on them, and did not have time to setup my cap checker. There is also one resistor that I don't have a measurement for the value of yet. Here is the circuit that I'm currently using.
It is VERY easy to kill the osc presently, and if the tuning cap gets turned so that the plates are more than 1/4 meshed together the amplitude drops from several volts to zero fairly quick. Also the tube and tuned circuit are so sensitive to hand capacitance that it is somewhat tricky to tune (you have to get it perfect and then over-shoot slightly).
That is basically the present state of things.