|
I replaced all of the paper caps and the mica caps in the deflection curcuits. About half of the resistors were over 30% off value and were replaced. The fine tuning control stop had broken off (a little tab on the shaft), so I soldered a piece of copper to the shaft and it works well as a stop. The buckshot parts replacement got a weak picture. I then used the CR-70 to do one rejuvenation, which increased the emission nicely, but the cutoff stayed weak. But the TV liked it as shown in the last image.
Last edited by Zenith6S321; 02-07-2015 at 05:59 PM.
|