Decided to stuff the parts back in the cabinet, since I'm more or less done with the recapping. There's still a vert lin issue I haven't sorted out yet, I think the resistors in the vert output cathode circuit are douched up or something. When I first got everything installed, vert height was way too short. Turned out to be a resistor feeding the oscillator from B+ that had drifted 120k too high. No biggie, replaced the resistor now there's plenty of height. The slight tearing at the top turned out to be a sync issue, because I didn't have any .47uf caps in the inventory. One is at the sync amp cathode, the other goes to the sync sep. Gonna be real nice once finished, I really like this set.
