|
Multiple images would mean that the horizontal is running too slowly, Make sure the caps in that area were replaced with the correct values, (I verify these against what was taken out, there may have been production changes from what the schematic shows) And, check the associated resistors. A quick method of localizing the trouble would be to disable the horizontal AFC circuit, and see if a single picture can be had by adjusting the horizontal hold (It won't "lock" with the AFC disabled, but you should be able to adjust for a single image) If you can't, the problem is in the oscillator circuit. If you can, re-enable the AFC, and if that pulls it off freq, the problem lies there...
|