Thanks,
Looking at the inside of the Chassis I don't see any loop antennas. The antenna switch (see the schematic listed in one of the above posts) has one of these wires that stick out the back of the chassis going to it.. It switches to one of the 4 bands tank circuit. :
The lower photo shows the two leads coming out. They were hanging down in close proximity to the "band" that can be seen under the support board for the chassis. So, I'm thinking there's must have been some kind of internal cabinet antenna Reese.
That's interesting History for that speaker, Tube mania. It sure is a nice and clean speaker. I'm going to remove it from the grill mounting for inspection. Then remove the mounting board in prep for some refinishing.
Got to buy a couple of 16mfd ecaps @ 450 or so WV too. Beats spending my money at the Bar watching football and looking at the Gals.. er.. oh.. nope.. that's wrong..
Buzz
