Okay, this is nuts.
I replaced one two section 40@250 can under the chassis, I picked it because i had replacements on hand, apparently it has something to do with the vertical because now I have a full, linear raster.
WTHeck? this set has no business working at all much less near perfect, it was stored poorly, peed on, Bleached, washed, baked and it works this well?
Half my restorations don't work this well without a major fight.
The Focus coil is shorted to the case, or maybe it still has some water inside because it started smoking when I powered it up, I just removed it and insulated it from the chassis and it's fine, I'll open it up later and see if it can be fixed.
The focus is off in the pictures because of the camera, not the set which has decent focus on the 5AXP4.
I don't know if it has sound because the speaker has no cone and the voice coil is open.