Quote:
Originally Posted by timmy
if you have the schematics for the 914-918a are these chassis 23inch also like the 908? and does those 2 chassis use a hv tripler? im working with don lindsly on if i could use the fly for the smaller chassis for the 908 but hes looking to see the schematics as well. thanks timmy
|
IIRC, the TS914 were all 23EGP equipped. The 918's were built using 21,23& 25 CRT's. They all used 3AT2 HV rect tubes. The ETS908 were a good earlier design. The TS914,918 and 921 was the cost-cutting later design. The smaller chassis used a focus voltage dropping resistor from the second anode source.