|
That is pretty cool Bob! I'll have to try that sometime.
I'm trying to preform the horizontal adjustments and have hit two walls the worst of which is that the linearity coil slug is BADLY frozen (I sprayed some deoxit gold in there and nothing) I'm afraid to proceed because I may end up breaking it. Please help!
Secondly in the HV adjustment procedure it says to adjust the HV control for 25KV, and the most I can get before bottoming out the control is 20KV. Is this something that will shake out if I iterate the procedure a few times?
Putting a meter in place of the HV fuse I'm getting around (ie a little over) 175mA of current.
|