|
Checking B+ and rectification
I put a DC meter on my + and - of the selenium rectifier and got a reading of MILLIVOLTS?
Could the lights be on, the tubes heat up and I get some sound and radio if the B+ was so low?
If the B+ was very low could it be the cause of the muddled sound?
Should I measure the ~ AC on the rectifier
I think I will change the original selenium rectifier for a full wave bridge rectifier and a 100ohm 10watt resistor
Last edited by omegaman; 01-15-2012 at 09:39 AM.
|