|
Determining exactly which pin to connect the DC meter to on the output EL95 to measure plate voltage was surprisingly challenging with my limited mental capabilities.
Finally, Wikipedia showed me that the anode was the plate
After reading up on measuring plate voltage (mostly guitar amps) and looking at EL95 diagrams, all I could do was match the plate symbol to the pdf diagram of the EL95 pinout and determine that EL95 PIN-5 the 'a' pin was the pin that I would connect my probe to
I have those clip probe connectors so I will connect to pin 5 of the EL95 and measure the DC voltage
Target voltage is 260
Does it matter which EL95 I test first?
Last edited by omegaman; 01-21-2012 at 02:32 PM.
|