|
this is what i have been saying that it gives a good picture but the g1 master is only up a quarter way because it will bloom and wash out to nothing as well as the contrast if turned cw and the g2 adjustments have to be on the low ccw side. anything that effects the hv has to be set low and im sure this was not like this from the factory in 1966.it wound out being the 4.7k resistor in the yoke that was giving the lines on the left side of the picture. if i were to raise the g1 master it would bloom and pull to the right and leave the left side 3 inches gone. so it still has low hv and why i just dont know and maybe my hv probe is not right but if it were, well it would show how low it really is. now i have to figure out why the vert wont lock.
|