View Single Post
  #2  
Old 02-04-2012, 09:22 PM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
bridging a 22meg across one of the resistors brought it down to 12meg so now I am at 30+12+29=71 meg total, closer to the 66meg it should be, will see if that improves the adj range any.

next problem, as I was going thru the set I found a S clipped in B+ fuse. Had not checked it before but figured it would be a good idea.

Its a littlefuse brand 250v but no amp rating. It did have a C5 stamped on the end of the fuse (not the side) I am guessing a 5 amp fuse as the fuse wire looks to be pretty hefty. So will hold off any more testing until I get the right fuse in there. argh...
Reply With Quote