Quote:
Originally Posted by Mal Fuller
Is the service switch in the "normal" position and are its contacts clean?
|
Yes, I checked it tonight to confirm it was working.
I replaced a few more Capacitors today, none really have anything to do with the Vert but since it was on the bench I did them.
I double checked the resistors on the Vertical board and the larger wirewounds under the chassis, all are OK, subbing the Yoke made no difference either.
Checked the Height and Lin controls for continuity, they're OK as is the Output Transformer as far as I can tell, there's continuity from the red to the blue, the other three wires also have continuity between them but I'm not sure what it is supposed to be.
I need to print out the Schematic for one thing, I was reading it from the PDF on a slow computer which made it difficult to find use.