|
You've probably already checked 'em, but there's two more peaking coils, L103 and L104 that you might want to doublecheck for continuity.
If those are good, what happens if you inject video from the B&K at the CRT grid, working back point by point towards the 6H6 detector diode? Need to reduce the output as you move back (to keep the pic from tearing/flagging) and reverse the phase a couple of times (since a tube's plate is always opposite phase from the grid). Also watch for the point at which the 'trailing ghosties' appear (that's assuming they arise after the detector in the video chain).
Last edited by old_coot88; 02-25-2012 at 09:37 PM.
|