Much progress today. The aligment went very well and taught me much. The picture, sound, and rf oscilator all needed to be adjusted. The one adjustment that gave the most trouble was the rf oscilator on channels 3 and 4. I also had some trouble with the yoke and ion trap placement to get maximum brightness and a full raster. I had to tweak both the yoke and ion trap extensively to achieve the brightest possible full raster picture. All that being said, the set is back together and looking really good.
Here is a couple pictures of the bottom of the chassis.
A couple of pictures of the screen with a test pattern. Notice the slight shadow in the lower left hand cornet of the screen.
One more shot.
