View Single Post
  #4  
Old 03-26-2012, 12:00 PM
Don Lindsly Don Lindsly is offline
Ex-Philco
 
Join Date: Jul 2005
Location: Colorado
Posts: 450
Tuner is a weak spot. It is a big rotating disc that breaks loose from the shaft. It is usually repairable by pinning and/or epoxy. Make sure the disc is on the correct position and take some tension off the detent spring when done.

The Sangamo electrolytics are terrible. I see after market caps tacked in. Restuffed electrolytics will clean up the insides.

Note ion trap position before removing the CRT. The set is a decent performer and should turn out well.
Reply With Quote