Quote:
Originally Posted by waltchan
The most common caps failed in the Panasonics are the surface-mount caps located on the video and Hi-Fi audio board, and I've seen this in many Panasonic units made after 1988, whether it's a simple, no-frill 2-head mono or 6-head Hi-Fi S-VHS unit. Video that turns black, no color, and distorted video, or distorted or no Hi-Fi audio sound are all caused by the surface-mount caps placed on bottom of the hybrid IC board. Repairs are always costly, and they will eventually fail again shortly in the future, due to poor design. They overheated most of the time due to poor ventilation, so the surface-mount caps dried up faster than normal.
|
This is the problem that plagues the last of the line Panasonic AG-1980 (built 1996 to 2001, K-chassis). Does replacing the caps with higher temp rated electrolytic or even tantalum caps solve the issues? Its only a matter of time until my 1980 starts acting up, and I'm not looking forward to taking that beast apart.
Its already got a dim VFD.
As for the later SVHS JVCs (1998-2004), they seem to be reliable although they all seem to be cursed with poor Hi-Fi and EP tape tracking. The DVHS units don't seem to suffer from these problems thankfully. The only problem deck is the HM-DH30000U. Like most JVC products of that era, it suffers from faulty caps from the factory.
For pro equipment, I'd stick with Panny over JVC. In high school TV class, thats all they used and we beat the living crap out of it. Just try killing a pair of AG-6500s with the AG-A750 editor. They had a nice A-B roll setup with 2xAG-DS545s, an AG-DS555, a AG-A850 editor, and a WJ-MX50 mixer. Don't know how that held up, but it seemed just as solid as the 80s gear.