Quote:
Originally Posted by holmesuser01
I've got several Sony VHS machines that all had the same problem: There's an arm that physically pulls the tape out of the cassette and moves it in place at the capstan and pinch roller. The pivot bearing gums up. Once it's freed up, the machine works fine. Most of the time, I have to remove the pivot from its shaft to get oil in it.
|
Did many of those. Easy fix! After you put it back together you need to run a tape, look down at the A/C head guides with a flashlight, run the tape forward and rev search and fine-adjust that arm height with the nut to make sure there's no tape wrinkling at the top or bottom edges.
Another common failure on those decks is the plastic take-up arm gear on the bottom of the deck will crack, split in two, and then the tape won't load around the drum. I think the last one of those I did was on a SLV-R1000. Definitely a worthwhile investment for that customer.