|
The Service Menu is different than the Menu for Color and Tint etc.. it was only menat to be accessed by Service People.
IF this set uses a Service Menu it will be accessed by some Method not obvious to the user.
If it was an XBR there would be a small snap switch on that board near center bottom, not sure what others used it but this seems to be a higher end set so it might.
Look for a small button switch on that board or nearby, there will be a corresponding hole in the back cover if it's for the Menu.
Hold it down while powering on the set and it should come up in Service Mode.
If it doesn't have a SM then the controls for the Screens should be on the board on the back of the CRT.
|