[Penthode]

I have been doing a bit of work on this set, as time permits, over the last month or so. I stripped the cabinet, restained it in Chesnut Brown and relaquered it with three coats of aerosol laquer.

It was a smoker set so there was tons of gunk to clean off from the interior. I removed the HV cage, removed the HO Transformer and cleaned it fully out. It is now pretty spotless.

I replaced a few cracked coils, the power connector and the curcuit breaker. I fashioned a couple of knobs to replace those missing. Still need the control door.

Fired it up on the weekend and did some trouble shooting. All appears to be in order EXCEPT for the HO Transformer. It appears to breakdown in operation so there is no HV. I called Moyers and await their reply.