|
The chassis is out of the cabinet in stand-alone. The HV is of course reduced (no DY attached) as is the pulse from the purple wire winding so the AGC plate pulse is low for now but still at 300 V peak and the blanker is low at the grid at -34volts. There are a number of resistors that have been replaced by me due to out of tolerance by a moderate amount. Plate resistors on the GU7s are out as well and still need replacement. Should be 27k and presently measure 21 / 22K and the tubes run hot. Focus volts is in the ballpark. Still the only video to be seen is at the left 1 inch or so of the screen and that's not very bright considering the screen volts and a good CRT with HV. Still plugging away.
|