[6GH8cowboy]

I'll look for those two parts in particular. The cathode cap is on the change list for sure. I'll also be checking for about a 150 ohm path between convergence pins 1 and 2. I'm going to verify the B Boost voltage but I suspect it's close as the screen for each gun is pretty perky.

Parts changed

Pictures added

Still suffering a lack of vertical deflection.

I now have a remote unit but I believe its for another RCA set but I think it could work. A freq counter loosely coupled shows 35 to 50 khz depending which button is pressed. That seems a bit broad to me and there is only one adjustment. I was expecting there to be only 1.5 kc apart for each function.