Quote:
Originally Posted by DavGoodlin
I read in my book that the NE2-H was a recommended replacement. The grounding of the flyback aux coil (that triggers via this neon) may be faulty. This was an issue in the later rectangular chassis KC-KD-KE as well.
Edit: This book has a good bit of advise about alignment of the color circuit (a quirky GE exclusive). The predecessor chassis CA and those before were RCA design. The tint control is a variable capacitor for example. PM me if you want a copy of the 'CB' chapters.
|
I have the GE service manual book, is your book the orange one vol one by Robert Goodman?
Some other interesting things about this set. The CB chassis I have is for the round CRT, but the same chassis was used also for the rectangle chassis with a plug in board for the pin cushion (if I am reading it right) My set also sports the later tint control that has a pot with a variactor diode to act as a phase shifting cap instead of the variable cap.
If all goes well I will pull the CRT to remove the lens today or tomorrow, there is only about an eight inch clear spot so it should come of easy.