View Single Post
  #18  
Old 09-16-2012, 08:04 PM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
Quote:
Originally Posted by David Roper View Post
How well the converter box works with an antenna has zero to do with what type of set is connected to the box. Zero. I could've sworn this had explained to you before.
Sorry about that. I should have stopped and thought awhile (a good long while) before shooting off that post. You are correct -- since the box is actually connected ahead of the TV's own tuner, the make, model, vintage, etc. of the TV itself makes no difference. I've seen in this very forum posts showing 1950s and even late '40s TVs on DTV converters, and the sets work quite well with them, showing good pictures. Since the TV itself is basically just acting as a display (the set's own tuner and IF circuits are processing only the channel 3 or 4 RF output signal from the box and not an OTA signal from an antenna), the converter doesn't care if the TV it is connected to is five or 55 years old; the converter will work regardless. The same reasoning may be applied to VCRs and DVD/Blu-ray players -- they don't give a darn how new or old the TV they are used with may be; the units will work just as well, except of course with b&w NTSC TVs the picture will not be in color or in HD.
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.
Reply With Quote