Quote:
Originally Posted by ohohyodafarted
Try to find an early Admiral scrapped chassis from a model 30A14CC1 or similar with the separate power supply chassis. The cable that connects the power supply chassis to the main chassis on that set uses the same plug and the socket. The one on the chassis can be removed to use as the female end. This is a very common B&W set and there are probably a number of parts chassis around. Else you will need to find a CTC5 parts chassis and a CTC5 convergence yoke to obtain both the socket and the plug to make up the needed cable.
|
Thanks Bob.
In the meantime until I find the appropriate connectore I shall extend the CRT and yoke leads and just leave the convergence coils attached to the chassis and off the CRT until I have confirmed a sensible picture.