|
Those are the new ones that Mouser has, yes the fit very well, are 105c IIRC they are 12mm wide, you can get a 4 cap can done no problem.
The main thing is how fast you can do a can , those 2 can caps take 10min tops from start to finish, figure about 5min tops per cap. Its much faster than my old way of removing the old cap, and prob as fast as doing under the chassis installation if you take into account good wiring practices (like term strips, no flying lead stuff). I would say its faster than if you had the correct twist lock can since you do not have to unsolder anything.
Last edited by DaveWM; 09-27-2012 at 11:52 PM.
|