|
ok all the wax caps under the chassis are now done, just a few on the pcb that mounts on the back and then on to the rest of the PCB. I replaced the 2 .47's in the flyback cage, dusted it gently, it "looks" ok for whatever that is worth.
By doing all the Point to Point stuff 1st it the hard part, the PCB caps are a cinch.
I do as you said, keep the part in the same location and keep the lead dress as original as possible. Had no breakage of parts in the recapping.
At this rate I would hope I can get the balance of it done before next weekend.
|