|
all done. the two paper caps on the video pcb were a PITA to get at, the solder pads were under the delay line, but I got them done. So all recapped now. I left the few orange and brown drops alone for now.
Next up I will sweep the resistors looking for any way out of whack, then will test all the tubes for shorts and emissions. After that I think I will be good to go for a power up. Will check the B+ rail for shorts 1st if thats ok I will do a full power start, no need to variac it since I have all new filter caps and 5U4 rectifiers anyway.
oh forgot the dumb coax, will have to get that worked out 1st before I do the power up.
|