|
the few caps I did not change were the domino types, there was at least one large value 1000pf on the horz board. I figured I would leave them be until I test it and see if there is an issue. This thing sure has a LOT of paper caps.
A quick pass did not turn up any faulty resistors. I did have an open fuse the .75amp on the top. I did not have the correct fuse type, so I rigged up a in line fuse holder that uses the blown fuse as a plug, and lets me use the more common stye. Just a temp fix until I get the correct fuse type. There is a B+ fuse, a HOT cathode fuse, and I am not sure what this one is for its a bit confusing on the schematic, seems like its tied into the yoke/vert out/damper circuit.
|