Quote:
Originally Posted by Eric H
It does require a trap.
Are you sure you mean the horizontal output and not the High Voltage Rectifier?
The 1B3 Rectifier will not have any visible glow except perhaps in a dark room, and then only if the High Voltage is working since it derives it's filament voltage from a single turn winding on the Flyback.
|
Yes, it's the tube in the photo closest to the HV cage.
I used Deoxit in the socket, (I don't think it was dry when I put the tube back in), and when I turned the set on, that hor. out. tube lit up very bright, then went dead.
I don't know if the Deoxit was a catalyst to heat up that tube, but seems like it.
I turned the set on tonight in the dark, and that tube was dead, no light at all coming from it at all.
Would that make no picture appear on the CRT?